代理產線

FSBB30CH60D

 2014-11-12

【基本資料】

【產品特性】

‧ VCE(SAT) Collector - Emitter Saturation Voltage : 2.10V@Max
‧ FWDi Forward Voltage : 2.40V@Max
‧ HS Switching Times_tON : 0.50us@Min
‧ HS Switching Times_tOFF : 1.40us@Max
‧ HS Switching Times_trr : 0.10us@Typ
‧ LS Switching Times_tON : 0.40us@Min
‧ LS Switching Times_tOFF : 1.40us@Max
‧ LS Switching Times_trr : 0.10us@Typ
‧ UL Certified No. E209204 (UL1557)
‧ 600 V - 30 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection
‧ Low-Loss, Short-Circuit Rated IGBTs
‧ Very Low Thermal Resistance Using Al2O3 DBC Substrate
‧ Built-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout
‧ Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
‧ Single-Grounded Power Supply
‧ LVIC Temperature-Sensing Built-In for Temperature Monitoring
‧ Isolation Rating: 2500 Vrms / 1 min.

【產品應用】

Motion Control - Home Appliance/Industrial Motor

【文字介紹】

FSBB30CH60D is an advanced Motion SPM® 3 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSMmotors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, thermal monitoring of drive IC, and fault reporting.

The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.