代理產線

AP8800

 2009-03-09

【基本資料】

【產品特性】

LED driving current up to 350mA in buck topology
Max. Vin 28V
Compatible with 12V & 24V standard systems
High efficiency up to 92%
High switching frequency up to 0.6MHz minimum
PWM/DC input for dimming control
Built-in soft-start function
Operating temperature from -25 to 85 deg C.
“Green” Molding Compound (No Br, Sb) & Lead Free Finish/RoHS Compliant
350mA LED Step-down Converter

【產品應用】

MR16 LED Lighting
HB LED 12/24V Solar Lighting
Commercial Lighting
LCD panel backlighting
Light bar in decorative lighting

【文字介紹】

The AP8800 is a step-down DC/DC converter designed to drive LEDs with a constant current. The device can drive up to seven LEDs, depending on the forward voltage of the LEDs, in series from a voltage source of 8V to 28V. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminates the need for ballast resistors. The AP8800 switches at frequency up to 0.6MHz. This allows the use of small size external components, hence minimizing the PCB area needed. Maximum output current of AP8800 is set via an external resistor connected between the VIN and SET input pins. Dimming is achieved by applying either a DC voltage or a PWM signal at the CTRL input pin. An input voltage of 0.2V or lower at CTRL shuts down the output at SW and puts the device into a low-current standby state.