【產品特性】‧ VCE(SAT) Collector - Emitter Saturation Voltage : 2.8V@Max
‧ FWDi Forward Voltage : 2.80V@Max
‧ HS Switching Times_tON : 0.45us@Min
‧ HS Switching Times_tOFF : 1.45us@Max
‧ HS Switching Times_trr : 0.25us@Typ
‧ LS Switching Times_tON : 0.35us@Min
‧ LS Switching Times_tOFF : 0.95us@Max
‧ LS Switching Times_trr : 0.20us@Typ
‧ UL Certified No. E209204 (UL1557)
‧ 1200 V - 10 A 3-Phase IGBT Inverter, Including Control ICs for Gate Drive and Protections
‧ Low-Loss, Short-Circuit-Rated IGBTs
‧ Very Low Thermal Resistance Using Al2O3 DBC Substrate
‧ Built-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout
‧ Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
‧ Single-Grounded Power Supply Supported
‧ Built-In NTC Thermistor for Temperature Monitoring and Management
‧ Adjustable Over-Current Protection via Integrated Sense-IGBTs
‧ Isolation Rating of 2500 Vrms / 1 min.
【產品應用】Motion Control - Home Appliance/Industrial Motor
【文字介紹】The FNA21012A is a Motion SPM® 2 module providing a fully-featured, high-performance inverter output stage for AC induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features: under-voltage lockouts, over-current shutdown, temperature sensing, and fault reporting.
The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logiclevel gate inputs to high-voltage, high-current drive signals to properly drive the module's internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.