代理產線

NTS0104GU12

 2014-07-23

【基本資料】

【產品特性】

• Wide supply voltage range:
 VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V 2. Maximum data rates: Push-pull: 50 Mbps
•  OFF circuitry provides partial Power-down mode operation
Inputs accept voltages up to 5.5 V
• ESD protection:
   HBM JESD22-A114E Class 2 exceeds 2500 V for A port
   HBM JESD22-A114E Class 3B exceeds 8000 V for B port
   MM JESD22-A115-A exceeds 200 V
   CDM JESD22-C101E exceeds 1500 V (For NTS0104UK 1000 V)
   IEC61000-4-2 contact discharge exceeds 8000 V for B port
   Latch-up performance exceeds 100 mA per JESD 78B Class II
• Specified from -40 C to +85 C and -40 C to +125 C


• Wide supply voltage range: VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V Maximum data rates: Push-pull: 50 Mbps
• IEC61000-4-2 contact discharge exceeds 8000 V for B port
• Specified from -40 C to +85 C and -40 C to +125 C plastic, extremely thin quad flat package; no leads;
• 12 terminals; body 1.70 x 2.0 x 0.50 mm


【產品應用】

• I2C/SMBus in PC/MB
• UART in PC/MB
• GPIO in PC/MB

【文字介紹】

The NTS0104 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 4-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B) can be supplied at any voltage between 2.3 V and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state.