代理產線

PTN3355BS

 2014-07-23

【基本資料】

【產品特性】

• VSIS 1.2 compliance (Ref. 3) for supported video output modes, Analog RGB current-source outputs, 3.3 V VSYNC and HSYNC outputs, pixel clock up to 240 MHz
• Signals integrated 1 : 2 VGA switch
• Supports firmware upgradability through ‘Flash-over-AUX’ and I2C-bus interface
• Power modes (when the application design is as per 
 Active-mode power consumption: ~200 mW at WUXGA, 1920*1200, 60 Hz(18 bpc), 410 uW at Low-power mode
• Supports slave I2C-bus interface for host debugging and configuration


ESD protection: 7.5 kV HBM
Single power supply (3.3 V) for easy integration in the platforms
Commercial temperature range: 0 C to 85 C
40-pin HVQFN, 6 mm x 6 mm x 0.85 mm (nominal); 0.5 mm pitch; lead-free package


【產品應用】

• Notebook computers
• Tablets and desktop PCs
• Dongles
• adapters
• Docking stations

【文字介紹】

• PTN3355 is a DisplayPort to VGA adapter with an integrated 1 : 2 VGA switch optimized primarily for motherboard applications, to convert a DisplayPort signal from the chip set to an analog video signal that directly connects to the VGA connector.
• PTN3355 integrates a DisplayPort receiver, a high-speed triple video digital-to-analog converter and 1 : 2 VGA switch that supports a wide range of display resolutions
• PTN3355 is powered from a 3.3 V power supply and consumes approximately 200 mW of power for video streaming in WUXGA resolution and 410uW of power in Low-powermode.