新聞中心

品佳力推 Nuvoton 適合工業電腦及周邊應用的 Super IO IC–NCT6106D

 2014-11-26

【方案介紹】
NCT6106D是目前針對工業PC應用的輸出輸入晶片(Super I/O),其不但滿足工業電腦應用上的各項需求,也已獲得主要工業電腦廠商的認證與使用。NCT6106D可謂是目前工業電腦應用的最佳選擇。


【方案特色
NCT6106D支持6組全功能序列阜,每一個序列阜支持128-byte FIFO、9-bit 模式、RS-485 資料流程向控制、可選擇外接14.7456MHz頻率;NCT6106D考慮到工業電腦應用常處於嚴苛的環境,可在溫度範圍-40℃至+85℃內運作;可透過LPC介面將Port80解碼;搭配新唐自行開發的Port80 Analyzer 應用程式或是Port80 Analyzer 偵錯卡,可直接讀取Port80值;搭配新唐自行開發的Health Manager軟體,人性化的介面可節省調校NCT6106D的硬體監控(Hardware Monitor)效能至最佳狀態時所耗費的資源。

【系統方塊圖】


 【方案圖】

 

【方案特性】
General
• Meet LPC Spec. 1.1 
• Support LDRQ# (LPC DMA), SERIRQ (Serialized IRQ) 
• Integrated hardware monitor functions 
• Support DPM (Device Power Management), ACPI (Advanced Configuration and Power Interface)
• Programmable configuration settings 
• Single 24-MHz or 48-MHz clock input 
• Support selective pins of 5 V tolerance

FDC
• Variable write pre-compensation with track-selection capabil
• Support vertical recording format 
• DMA-enable logic 
• 16-byte data FIFO 
• Support floppy disk drives and tape drives 
• Detect all overrun and underrun conditions 
• Built-in address mark detection circuit to simplify the read ele
• FDD anti-virus functions with software write protect and FDD inactive) 
• Support 3.5-inch or 5.25-inch floppy disk drives 
• Compatible with industry standard 82077 
• 360K / 720K / 1.2M / 1.44M / 2.88M formats 
• 250K, 300K, 500K, 1M, 2M bps data transfer rate 
• Support 3-mode FDD and its Windows driver

Interface
• Uart/Parallel Port/KB controller/CIR & IR /GPIO /PECI / AMD SB-TSI /SMBus

Power Measurement
• Support Power Consumption measurement 
• Fading LED driver control for power status and diagnostic indications

Advanced Power Saving
• Advanced Sleep State Control to save motherboard Stand-by power consumption

Operation voltage
• 3.3 voltage

Package
•128-pin LQFP

【應用範圍】
NCT6016D適合應用於工業計算器、桌上型電腦、電腦主機板、電腦工作站等