熱點頻道

品佳力推Nuvoton適用於PC應用的 Super IO IC–NCT610xD

 2014-05-28

【產品介紹】
NCT6106D是目前針對工業PC應用的輸出輸入晶片(Super I/O),其不但滿足工業電腦應用上的各項需求,也已獲得主要工業電腦廠商的認證與使用。NCT6106D可謂是目前工業電腦應用的最佳選擇。

產品特色】
支持6組全功能COM port,每一個序列阜支持128-byte FIFO、9-bit 模式、RS-485 資料流程向控制、可選擇外接14.7456MHz頻率;NCT6106D考慮到工業電腦應用常處於嚴苛的環境,可在溫度範圍-40℃至+85℃內運作;可透過LPC介面將Port80解碼;搭配新唐自行開發的Port80 Analyzer 應用程式或是Port80 Analyzer 偵錯卡,可直接讀取Port80值;搭配新唐自行開發的Health Manager軟體,人性化的介面可節省調校NCT6106D的硬體監控(Hardware Monitor)效能至最佳狀態時所耗費的資源,NCT6106D可以兼容與NCT6104D及NCT6102D差異在於支援的COM port 組數,可以提供客戶較多選擇。

【系統方塊圖】




產品特性:
General 
Meet LPC Spec. 1.1
‧Support LDRQ# (LPC DMA), SERIRQ (Serialized IRQ)
‧Integrated hardware monitor functions
‧Support DPM (Device Power Management), ACPI (Advanced Configuration and Power Interface)
‧Programmable configuration settings
‧Single 24-MHz or 48-MHz clock input
‧Support selective pins of 5 V tolerance 

FDC
‧Variable write pre-compensation with track-selection capabil
‧Support vertical recording format
‧DMA-enable logic
‧16-byte data FIFO
‧Support floppy disk drives and tape drives
‧Detect all overrun and underrun conditions
‧Built-in address mark detection circuit to simplify the read ele
‧FDD anti-virus functions with software write protect and FDD inactive)
‧Support 3.5-inch or 5.25-inch floppy disk drives 
‧Compatible with industry standard 82077 
‧360K / 720K / 1.2M / 1.44M / 2.88M formats
‧250K, 300K, 500K, 1M, 2M bps data transfer rate
‧Support 3-mode FDD and its Windows driver 

Interface
‧Uart/Parallel Port/KB controller/CIR & IR /GPIO /PECI / AMD SB-TSI /SMBus
‧Power Measurement
‧Support Power Consumption measurement
‧Fading LED driver control for power status and diagnostic indications

Advanced Power Saving
‧Advanced Sleep State Control to save motherboard Stand-by power consumption
‧Operation voltage
‧3.3 voltage

Package
‧128-pin LQFP

應用範圍:
桌上型電腦、電腦主機板、電腦工作站等

若需任何產品詳情, 請洽品佳集團Nuvoton產品線企劃人員, 謝謝!